Knowledge Base Menu

Locks Compatible with TDS Security Doors

Our steel security doors are tested with specific locking systems to achieve RC2–RC5 ratings. The table below shows which locks are used in which door configurations. RC classification applies to the complete door assembly—leaf, frame, hinges, and lock—as tested under EN 1627.

High Security Door

View Our High Security Doors

Explore our range of high security doors with various lock options.

Note: RC class applies to the complete door assembly after laboratory testing. A lock alone does not confer an RC rating. The combinations below have been tested in our door sets.

Mechanical Locks

LockStandardRC ClassFireEvacuationAccess Control
ROM 2EN 12209 class 7RC2Depending on door setKey/handleNo
MOTTURA Multi Point (85.xxx)EN 12209 class 7RC4, RC5Key/handleNo
MOTTURA GorillaEN 179, EN 1125RC4, RC5Panic bar/handleNo
KALE 352 REN 12209RC3Key/handleNo

Electromechanical and Motorized Locks

LockStandardRC ClassFireEvacuationAccess Control
ABLOY MP520 / MP522EN 14846, EN 179, EN 1125RC3, RC4, RC5Depending on door setHandle/panic barYes
ABLOY EL566 / EL568 (split spindle)EN 14846, EN 179, EN 1125RC3, RC4, RC5Depending on door setMechanical exit insideYes (outside)
ABLOY EL567 / EL569 (straight spindle)EN 14846RC3, RC4, RC5Config dependentYes (both sides)
ISEO MULTIBLINDO / FIAMEN 179, EN 1125RC3, RC4, RC5Panic bar/handleYes

ISEO MULTIBLINDO is also suitable for EN 50518 alarm receiving centers and similar critical infrastructure.